Suitable cables: 21/31kV, 26/35kV single core cross-linked polyethylene (XLPE) cables, with a cross-sectional area of 50-400mm ², in compliance with IEC 60502-4 and GB/T 12706 standards, designed specifically for flammable and explosive scenarios in petroleum, chemical, mining, and other industries.

A 35kV Single-Core Shrinkable Joint is a specialized component used to connect two single-core medium-voltage (35kV) cables, ensuring electrical continuity, insulation, and environmental protection.

Suitable cable: 0.6/1kV dual core low-voltage cable (phase line+neutral line), with a cross-section of 10-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for industrial equipment, rail transit signal systems, and renewable energy scenarios. Pre expanded silicone rubber sleeve (tensile ratio ≥ 600%), tightly wrapped around the cable by elastic shrinkage, suitable for irregular cross-sections

Suitable cable: 0.6/1kV four core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 25-400mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

10KV/20KV/35KV heat shrink terminals and intermediate joints (including single core/three core models), compatible with cross-linked cables (XLPE) and oil immersed cables, covering a cross-section of 50-400mm ². IP68 waterproof (tested under 0.1MPa water pressure for 48 hours), IEC 60502-4）； Nonlinear stress control (field strength ≤ 2.5kV/mm); Long term insulation: dielectric strength ≥ 30kV/mm, temperature resistance -55 ℃~130 ℃. The weight of the propane spray gun is 1/3 of the traditional porcelain sleeve terminal (with a diameter of 120mm and a terminal weight of less than 1.2kg). It can be installed in 3 minutes per set, saving 65% of the working hours compared to cold shrinkage technology.

A single core intermediate joint heat shrink solution designed specifically for 35kV cross-linked polyethylene (XLPE) cables, using radiation cross-linked polyolefin materials to ensure stable dielectric strength (≥ 30kV/mm) in extreme environments ranging from -40 ℃ to+105 ℃. The inner diameter range is adjustable from 50-400mm, compatible with mainstream cable specifications at home and abroad (such as YJV, YJLV series). Anti UV and chemical corrosion design, passed 1000 hour salt spray test, with a lifespan of ≥ 20 years, low-temperature (120 ℃) heat shrink process, and installation time reduced by 60% compared to traditional solutions.

The 35kV three core intermediate joint heat shrink kit is designed specifically for the intermediate connection of 35kV power cables. It uses radiation cross-linked polyolefin heat shrink material to ensure high-strength insulation and sealing performance, and is suitable for direct burial, tunnels, and humid environments. This product has a withstand voltage level of 35kV, a temperature range of * * -40 ° C to+105 ° C * *, resistance to UV aging and chemical corrosion, and a lifespan of over 20 years. Triple protection: integrated stress control, insulation recovery, waterproof sealing layer, reducing the risk of partial discharge (<5pC). Quick installation: shrink the flame or hot air gun and complete the joint production within 30 minutes (saving 50% time compared to traditional casting). IP68 waterproof rating, suitable for coastal high salt spray and mining dust environments. Support cable cross-section of 50mm ² -400mm ².

Specially designed for 0.6kV/1kV cables, the four core cold shrink intermediate joint provides fast installation, durable sealing, and excellent electrical performance. The pre expanded silicone rubber technology is used to easily adapt to a variety of cable types without heating tools, ensuring water resistance, dust prevention and anti-aging. Suitable for power transmission and distribution systems, industrial projects, and underground pipelines, significantly reducing maintenance requirements and ensuring long-term stable operation of the power grid. Compliant with international standards, resistant to extreme temperatures (-50 ℃ to+200 ℃), and UV resistant, it is an ideal choice for complex environments. Save time, improve reliability - upgrade your cable network now!

Ensure reliable 0.6kV/1kV cable connections with durable five-core cold shrinkable joints, ideal for underground cable jointing, renewable energy grids, and industrial power networks. Featuring cold shrink technology, these joints offer waterproof, corrosion-resistant, and tool-free installation, reducing downtime for XLPE/PVC cables. Perfect for maintenance-free, high-performance electrical systems.