Compatible cable: 26/35kV three core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for indoor scenarios such as substations and data centers.

Suitable cable: 26/35kV three core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for outdoor scenarios of offshore wind power, rail transit, and industrial high-voltage transmission and distribution.

A 35kV Single-Core Shrinkable Joint is a specialized component used to connect two single-core medium-voltage (35kV) cables, ensuring electrical continuity, insulation, and environmental protection.

Compatible cables: 21/31kV, 26/35kV single core and three core cross-linked polyethylene (XLPE) cables, with a cross-sectional area of 50-400mm ², in compliance with IEC 60502-4 and GB/T 12706 standards, designed specifically for flammable and explosive environments such as petroleum, chemical, and mining.

Compatible cable: 0.6/1kV dual-core low-voltage cable (phase line + neutral line), with a cross-sectional area of 10-300mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for industrial equipment, rail transit signal systems and renewable energy scenarios.

Five core cold shrink terminal, compatible with 4-300mm ² low-voltage cables, IP68 waterproof+UL94 V-0 flame retardant dual certification, no heating installation for 3 minutes. Empirical case: Subway power supply EN 45545-2 fire protection, photovoltaic power station anti UV aging, scanning code to obtain material traceability and elasticity simulation report.

Suitable cable: 0.6/1kV three core low voltage cable (cross-section 10-300mm ²), compliant with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV four core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 10-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV single core low-voltage cable (phase line+neutral line), with a cross-sectional area of 10-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Compatible cable: 0.6/1kV four-core low-voltage cable (3 cores + neutral line), with a cross-sectional area of 10-400mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for building power distribution, rail transit and industrial equipment.

Suitable cable: 0.6/1kV five core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, rail transit, and new energy scenarios. IP68 protection level pre expanded silicone rubber sleeve (stretch rate ≥ 400%), relying on elastic memory shrinkage to adapt to irregular cable surfaces, pre expanded silicone rubber sleeve (stretch rate ≥ 400%), relying on elastic memory shrinkage to adapt to irregular cable surfaces

Suitable cable: 0.6/1kV five core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.