Compatible cable: 26/35kV single core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for indoor scenarios such as substations and data centers.

Compatible cable: 26/35kV three core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for indoor scenarios such as substations and data centers.

Suitable cable: 26/35kV three core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for outdoor scenarios of offshore wind power, rail transit, and industrial high-voltage transmission and distribution.

Compatible cable: 0.6/1kV dual-core low-voltage cable (phase line + neutral line), with a cross-sectional area of 10-300mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for industrial equipment, rail transit signal systems and renewable energy scenarios.

It is suitable for 0.6/1 KV PVC,XLPE,rubber insulation single-core,two-core,three-core,four-core,five-core electric cable.Suitable cable: 0.6/1kV three core low voltage cable (3-core+neutral wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, rail transit, and industrial equipment.

Suitable cable: 0.6/1kV three core low voltage cable (cross-section 10-300mm ²), compliant with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV five core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV dual core low-voltage cable (phase line+neutral line), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for industrial equipment, rail transit signal systems, and renewable energy scenarios. Pre expanded silicone rubber sleeve (tensile ratio ≥ 600%), tightly wrapped around the cable by elastic shrinkage, suitable for irregular cross-sections

Compatible cable: 0.6/1kV three-core low-voltage cable (3 cores + neutral line), with a cross-sectional area of 10-400mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for building power distribution, rail transit and industrial equipment.

Compatible cable: YJV/YJLV single core cross-linked cable (cross-section 25-300mm ²), voltage level 8.7/15kV, in compliance with GB/T 18889 and IEC 60502-2 standards, designed specifically for indoor scenarios such as substation cabinets and data centers. Electrical testing: Power frequency withstand voltage of 45kV/30min without breakdown, lightning impulse withstand voltage of 105kV (GB/T 3048.8);

Compatible cable: 8.7/10kV dual core cross-linked cable (cross-section 25-240mm ²), in compliance with GB/T 12706 and IEC 60502-4 standards, specifically designed for railway signaling, mining equipment, and industrial power distribution scenarios. Red/yellow identification kit (IEC 60446 standard) reduces the risk of misconnection by 90%. Waterproof sealing: IP67 protection level

Compatible cable: 0.6/1kV four core low voltage cable (3+1 core structure), with a cross-section of 10-300mm ², complying with IEC 60502-2 and GB/T 12706 standards, pre installed with yellow, green, and red color identification sleeves and blue neutral line identification, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios. Quick installation: Propane spray gun low-temperature shrinkage (110-130 ℃), single set installation time ≤ 4 minutes, 50% higher efficiency than traditional cold shrinkage technology