Suitable cable: 26/35kV single core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for outdoor scenarios of offshore wind power, substations, and industrial high-voltage transmission and distribution.

Suitable cable: 0.6/1kV four core low voltage cable (3-core+neutral wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, rail transit, and industrial equipment.

Five core cold shrink terminal, compatible with 4-300mm ² low-voltage cables, IP68 waterproof+UL94 V-0 flame retardant dual certification, no heating installation for 3 minutes. Empirical case: Subway power supply EN 45545-2 fire protection, photovoltaic power station anti UV aging, scanning code to obtain material traceability and elasticity simulation report.

Suitable cable: 0.6/1kV dual core low-voltage cable (phase line+neutral line), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for industrial equipment, rail transit signal systems, and renewable energy scenarios. Pre expanded silicone rubber sleeve (tensile ratio ≥ 600%), tightly wrapped around the cable by elastic shrinkage, suitable for irregular cross-sections

Compatible cable: 0.6/1kV three-core low-voltage cable (3 cores + neutral line), with a cross-sectional area of 10-400mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for building power distribution, rail transit and industrial equipment.

Compatible cable: 0.6/1kV four-core low-voltage cable (3 cores + neutral line), with a cross-sectional area of 10-400mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for building power distribution, rail transit and industrial equipment.

Suitable cable: 0.6/1kV five core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, rail transit, and new energy scenarios. IP68 protection level pre expanded silicone rubber sleeve (stretch rate ≥ 400%), relying on elastic memory shrinkage to adapt to irregular cable surfaces, pre expanded silicone rubber sleeve (stretch rate ≥ 400%), relying on elastic memory shrinkage to adapt to irregular cable surfaces

Designed for low-voltage cables, the three-core cold shrink intermediate provides quick installation, durable sealing and superior electrical performance. With pre-expanded silicone rubber technology, it is easy to adapt to a variety of cable types without heating tools, ensuring water, dust and aging resistance. Suitable for power transmission and distribution systems, industrial projects and underground pipe networks, significantly reduce maintenance needs and ensure long-term stable operation of power grids. Resistant to extreme temperatures and UV rays, ideal for complex environments. ** Save time and improve reliability - Upgrade your cable network now!

Specially designed for 0.6/1 kV low-voltage cables, the four core cold shrink terminal head adopts pre expanded silicone rubber technology, which can be quickly installed without heating or special tools. Excellent waterproof and dustproof performance, UV and aging resistance, adaptability to extreme temperatures (-60 ℃ to 200 ℃), ensuring long-term stable operation in outdoor, underground and industrial environments. Compatible with multiple cable types, maintenance free, cost-effective, widely used in building power distribution, renewable energy, and equipment connection. Save time and reduce failure rates - order now and upgrade your cable terminal protection!

Specially designed for 0.6kV/1kV cables, the four core cold shrink intermediate joint provides fast installation, durable sealing, and excellent electrical performance. The pre expanded silicone rubber technology is used to easily adapt to a variety of cable types without heating tools, ensuring water resistance, dust prevention and anti-aging. Suitable for power transmission and distribution systems, industrial projects, and underground pipelines, significantly reducing maintenance requirements and ensuring long-term stable operation of the power grid. Compliant with international standards, resistant to extreme temperatures (-50 ℃ to+200 ℃), and UV resistant, it is an ideal choice for complex environments. Save time, improve reliability - upgrade your cable network now!

Designed for low-voltage cable termination (1kV), this cold shrinkable termination offers quick, tool-free installation and waterproof/dustproof protection, ideal for building power distribution systems, commercial cable projects, and industrial equipment connections.Compatible with PVC/XLPE cables, it ensures aging-resistant performance and long-term durability.

Ensure reliable 0.6kV/1kV cable connections with durable five-core cold shrinkable joints, ideal for underground cable jointing, renewable energy grids, and industrial power networks. Featuring cold shrink technology, these joints offer waterproof, corrosion-resistant, and tool-free installation, reducing downtime for XLPE/PVC cables. Perfect for maintenance-free, high-performance electrical systems.