Suitable cable: 0.6/1kV four core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 10-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV single core low-voltage cable (phase line+neutral line), with a cross-sectional area of 10-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV dual core low-voltage cable (phase line+neutral line), with a cross-section of 10-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for industrial equipment, rail transit signal systems, and renewable energy scenarios. Pre expanded silicone rubber sleeve (tensile ratio ≥ 600%), tightly wrapped around the cable by elastic shrinkage, suitable for irregular cross-sections

Compatible cable: 10KV three core low voltage cable (3+1 core structure), with a cross-section of 25-400mm ², complying with IEC 60502-2 and GB/T 12706 standards, pre installed with yellow, green, and red color identification sleeves and blue neutral line identification, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios. Quick installation: Propane spray gun low-temperature shrinkage (110-130 ℃), single set installation time ≤ 4 minutes, 50% higher efficiency than traditional cold shrinkage technology.

Compatible cable: 0.6/1kV four core low voltage cable (3+1 core structure), with a cross-section of 10-300mm ², complying with IEC 60502-2 and GB/T 12706 standards, pre installed with yellow, green, and red color identification sleeves and blue neutral line identification, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios. Quick installation: Propane spray gun low-temperature shrinkage (110-130 ℃), single set installation time ≤ 4 minutes, 50% higher efficiency than traditional cold shrinkage technology

The Five - Core Cable Terminal is a high - quality electrical connection component designed to handle the safe and efficient termination of five - core cables. It plays a crucial role in various electrical systems, ensuring reliable power transmission and signal transfer.

The 10kV single core heat shrinkable intermediate joint is a connection component designed specifically for cross-linked polyethylene (XLPE) single core cables, suitable for cable systems with voltage levels of 3.6/6kV, 6/10kV, 8.7/10kV, and 8.7/15kV. Its core functions include sealing and waterproofing, insulation reinforcement, and stress control, especially suitable for flammable and explosive environments such as petroleum, chemical, and mining

Adapter cable: YJV/YJLV series three-core cable (section 25-400mm²), voltage class 10kV, in line with GB/T 18889 and IEC 60502-2 standards, designed for indoor scenarios such as substations and data centers. Electrical test: power frequency voltage 42kV/5min no breakdown, lightning impact voltage 95kV (GB/T 3048.8); Mechanical strength: Axial tensile strength ≥180N (IEC 61479), withstand the mechanical vibration of the switch cabinet (5-200Hz/3g acceleration). Compact design: the outer diameter is 45% smaller than the traditional porcelain sleeve (Φ85mm), suitable for KYN28A-12 switchgear; Intelligent identification: Preset red/yellow/green phase identification ring (according to IEC 60446), error rate is reduced by 98%.

Adapter cable: YJV/YJLV series three-core cable (section 25-400mm²), voltage class 10kV, in line with GB/T 18889 and IEC 60502-2 standards, designed for indoor scenarios such as substations and data centers. Electrical test: power frequency voltage 42kV/5min no breakdown, lightning impact voltage 95kV (GB/T 3048.8); Mechanical strength: Axial tensile strength ≥180N (IEC 61479), withstand the mechanical vibration of the switch cabinet (5-200Hz/3g acceleration). Compact design: the outer diameter is 45% smaller than the traditional porcelain sleeve (Φ85mm), suitable for KYN28A-12 switchgear; Intelligent identification: Preset red/yellow/green phase identification ring (according to IEC 60446), error rate is reduced by 98%.

Adapter cable: YJV/YJLV series three-core cable (section 25-400mm²), voltage class 10kV, in line with GB/T 18889 and IEC 60502-2 standards, designed for indoor scenarios such as substations and data centers. Electrical test: power frequency voltage 42kV/5min no breakdown, lightning impact voltage 95kV (GB/T 3048.8); Mechanical strength: Axial tensile strength ≥180N (IEC 61479), withstand the mechanical vibration of the switch cabinet (5-200Hz/3g acceleration)

Adapter cable: XLPE/PVC three-core cable (section 25-400mm²), voltage class 10kV, in line with GB11033 and IEC 60502-4 standards, designed for outdoor harsh environment. Waterproof seal: IP68 protection (0.1MPa water pressure 48-hour verification, self-melting rubber layer radial pressure ≥0.25MPa); Environmental aging resistance: UV-B UV protection layer (2000 hours of aging shrinkage ≥95%) + 10% salt spray resistance 3000 hours (ASTM B117); Mechanical stability: Axial tensile ≥200N (IEC 61479), resistant to EN 61373 Class B vibration (5-200Hz/5g).

Technical Summary of 10kV Three core Intermediate Joint Compatible cable: XLPE/PVC three core cable (cross-section 25-400mm ²), voltage level 10kV, in compliance with GB11033 and IEC 60502-4 standards. Core Technology: Stress control: Nonlinear conductive layer design, axial field strength gradient ≤ 1.2kV/mm (COMSOL simulation number # FEA2024-10kV); Waterproof sealing: IP68 protection (tested under 0.1MPa water pressure for 48 hours), self melting adhesive layer forms a radial pressure of ≥ 0.25MPa; Insulation strengthening: dielectric strength ≥ 28kV/mm (ASTM D149), temperature resistance -55 ℃~105 ℃. Performance verification: Mechanical strength: axial tensile strength ≥ 180N (IEC 61479), withstand 5-200Hz vibration (EN 61373); Environmental tolerance: Tested by 10% salt spray for 2000 hours (ASTM B117), resistant to UV aging for 2000 hours (shrinkage rate maintained ≥ 95%). Industry applications: Photovoltaic power station: HSY-10-3.3 type is used for the collection line of a 20MW power station, with zero faults for 3 years; Subway tunnel: The anti vibration model has passed the EN 45545-2 fire certification (smoke density<20%) and is suitable for humid environments. Service guarantee: Scan the QR code to trace the batch of raw materials and provide testing videos; Free cable cross-section matching tool and 3D installation guide provided.